中文版         ENGLISH

  •  
  • Equipments

  •  
  • News

  • Company News
  • Exhibitions
  •  
  • Network

  • Domestic market
  • International market
  •  
  • Contact Us

  • Contact
  • Recruitment
  •  
  • CContact Us

    Tel: +86-580-8050975, +86-580-8058618

    Fax: +86-580-8050162

    E-mail: screw@jmjxc.com

    Adds: No.18, Dafeng Road, Xihou Industrial Park, Zhoushan, Zhejiang, China

    Product
    Home >> Product
     
     

    Bimetallic barrel for injeciton moulding machine
    Our company has not only got the remarkable achievement on the production of normal bimetallic screw and barrel,also we have deeply researched on the barrel and screw for the special engineering plastic,for now much of engineering plastics add the calcium,kaolin,red clay, silica or add Glass fiber, carbon fiber, boron fiber and halogen free plastic to make the original plastic much better to adapt the specific plastic products.On the other hand, it may make the screw and barrel wear and corrosion quickly, In order to solve this problem,we have invented a kind of special alloy powder,whose ingredient contains 25%~50% Wc tungsten carbide.It makes the service life of screw and barrel much more longer than the other kinds of bimetallic screws and barrels.

     

    material Grade A Wc-10 tungsten carbide alloy
    Processing range Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
    Processing technic

    Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
    Alloy powder composition Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc
    The index of hardness HRC62-65,the service life of 5-6 times longer than the nitrided one
    Characteristics of alloy powder High wearing resistance,high corrosion resistance and high temperature resistance
    Apply to Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic

     

    material

    Grade B Ni-20 Ni-based alloy

    Processing range

    Inner diameter : φ16mm-φ450mm ,effective length to 9000mm

    Processing technic

    Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side

    Alloy powder composition

    Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc

    The index of hardness

    HRC60-63,the service life of 4-5 times longer than the nitrided one

    Characteristics of alloy powder

    High corrosion resistance,high wearing resistance and high temperature resistance

    Apply to

    PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc

     

    material

    Grade C Fe-30 Fe-based alloy

    Processing range

    Inner diameter : φ16mm-φ450mm ,effective length to 9000mm

    Processing technic

    Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side

    Alloy powder composition

    Fe,C,Si,Cr,B,Mo,Ni, Co,etc

    The index of hardness

    HRC59-61,the service life of 3-5 times longer than the nitrided one

    Characteristics of alloy powder

    Wearing and corrosion resistance

    Apply to

    Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc

     

    Bimetallic barrel for extrusion machine

     

    material

    Grade A Wc-10 tungsten carbide alloy

    Processing range

    Inner diameter : φ16mm-φ450mm ,effective length to 9000mm

    Processing technic

    Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side

    Alloy powder composition

    Wc(50%~60%),C,Si,Cr,B,Ni,Mo,Co,etc

    Index of hardness

    HRC62-65,the service life of 5-6 times longer than the nitrided one

    Characteristics of alloy

    High wearing resistance,high corrosion resistance and high temperature resistance

    Apply to

    PE pipes, PVC, PPR, wood and plastic, XPS extruded plate, wire and cable, blown film machine, recycled plastic, etc

     

    material

    Grade C Fe-30 Fe-based alloy

    Processing range

    Inner diameter : φ16mm-φ450mm ,effective length to 9000mm

    Processing technic

    Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side

    Alloy powder composition

    Fe,C,Si,Cr,B,Mo,Ni, Co,etc

    Index of hardness

    HRC59-61,the service life of 3-5 times longer than the nitrided one

    Characteristics of alloy

    Wearing and corrosion resistance

    Apply to

    PE pipes, PVC, PPR, wood and plastic, XPS extrusion board, blown film machine, recycled plastic, etc

     

    Bimetallic screw for injeciton moulding machine
    Processing range:inner diameterφ12mm – φ280mm,,the effective length reach 8000mm
         Grade-A superhard and high wearing resistance bimetallic screw: the base material is imported Sweden Km22  steel and superhard high speed steel, which is  high wearing resistance, high toughness and high corrosion resistance, hardness could reach HRC59-64, allying for processing nylon plus 50% ~ 60% glass fiber, bakelite, magnetic powder, ceramic powder, magnesium powder, iron powder, copper powder, aluminum and other special plastic, the service life of 5-8 times longer than the nitrided one.
        Grade B strong corrosion resistantance bimetallic screw:take base material of  improted GRC-276, GE113 ,which is strong temperature resistance and high corrosion resistance, applying for the special plastic which is high speed,high temperature and high wearing and corrosion, nylon plus 20% - 40% fiber glass, halogen-free flame retardant plastic, PPE flame retardant plastic, XPS flame retardant plastic special plastics through solid solution plus aging hardening,  the service life of 4-6 times longer than the nitrided one.
        Grade-C wearing resistance bimetallic screw: take base material of 38 CrMoAla, SKD61, din 1.8550 and1.8519 ,screw flight and bottom cladding alloy powder, the surface hardness can be reach HRC60 ~ 62, the thichkness of alloy layer is 1 mm - 2.5 mm, with extremely high wear resistance and corrosion resistance, applicable to PC, PE, PVC and other plastic processing.
    bimetallic screw for PC only:take base material of special stainless steel, 42 CrMo, then hardening and chroming ,suitable for processing transparent plastic products, such as lens, white material, back plate, guide plate, acrylic products, the service life is 3-5 times longer than the nitrided one .


    Bimetallic screw for extrusion machine
    Specification: φ15 mm -φ250 mm , L/D = 15 ~ 45
        Screw take base material of 38 CrMoAla or SACM645, SKD61, din 1.8519 and 1.8550, material, screw surface spraying nickel base tungsten carbide alloy, alloy thickness 1.5mm ~ 1.5 mm, hardness reach HRC62-65, with the characteristics of  high wearing resistance and corrosion resistance ,mainly apply for the PVC pipes, PE plastic foam, EPE pearl cotton board, XPS extruded plate, PE pipe, PPR pipe, cable machine, chemical fiber machine, wood and plastic, blown film machine, recycling granulator machine, the service life is 3-5 times longer than the nitrided one.
        Screw can be selected from ordinary, gradual, pinned,shielding, separating and exhausting type, the compression radio of screw can be designed according to different raw materials and machinery.

    Bimetallic conical twin screw and barrel
        Bimetallic conical twin barrel has got the nation patent,and we are the only company in manufacturing the bimetallic conical twin barrel.Adopting the technique of rotary casting alloy,it makes the alloy powder’s compactness and wearing resistance the same as the bimetallic single barrel thus solving the defect of short service life and low wear-resisting of nitrided conical twin barrel,and rewrite the history of only manufacturing bimetallic single barrel but no bimetallic conical twin double barrel in domestic land.
        Wc-10 tungsten carbide alloy ,with the characteristics of high hardness ,high hard-wearing and corrosion resistance ,and high temperature resistance ,the hardness of alloy layer reaches HRC60-65,thus having the service life of 5-8times longer than the nitrided one.It is suitable for processing PVC plus calcium powder,building plastic template, pipe, sheet, ,WPC , hanging plate and other engineering plastics.
        Grade A screw: the base material is SKD61,Din 1.8519 or 1.8550,with the hardening then nitriding, the surface hardness of screw can reach HRC60-65,thus having the characteristics of  high wearing and corrosion resistance .
        Grade B screw : the base material is 38CrMoAla,the screw flight through the high temperature spraying Ni-based alloy powder,the surface hardness can reach HRC58-62,thus having the characteristics of high wearing and corrosion resistance.


    Bimetallic parallel twin screw and barrel
           Bimetallic parallel twin barrel has got the nation patent,and we are the only company in manufacturing the bimetallic twin barrel.Adopting the technique of rotary casting alloy,it makes the alloy powder’s compactness and wearing resistance the same as the bimetallic single barrel thus solving the defect of short service life and low wear-resisting of nitrided twin barrel,and rewrite the history of only manufacturing bimetallic single barrel but no bimetallic twin double barrel in domestic land.
        Wc-10 tungsten carbide alloy ,with the characteristics of high hardness ,high hard-wearing and corrosion resistance ,and high temperature resistance ,the hardness of alloy layer reaches HRC60-65,thus having the service life of 5-8 times longer than the nitrided one.It is suitable for processing PVC plus calcium powder,building plastic template, pipe, sheet, ,WPC , hanging plate and other engineering plastics.
        Grade A screw: the base material is SKD61,Din 1.8519 or 1.8550,with the hardening then nitriding, the surface hardness of screw can reach HRC60-65,thus having the characteristics of  high wearing and corrosion resistance .
        Grade B screw : the base material is 38CrMoAla,the screw flight through the high temperature spraying Ni-based alloy powder,the surface hardness can reach HRC58-62,thus having the characteristics of high wearing and corrosion resistance.


    Bimetallic screw and barrel for rubber machine
        The bimetallic barrel for rubber machine is produced through high-temperature and speed centrifugal casting,the thickness of the alloy layer could reach 2mm-3mm one side,thus having the  characteristics of high hardness , high wearing and high corrosion resistance .
    The screw flight spray the WC-10 tungsten carbide alloy powder,the thickness of alloy layer is 1.5mm-3.5mm, the hardness can reach HRC58-62.It is suitable for the rubber machine of the pinned cold feeding,ordinary cold feeding,exhaust cold feeding,new kind of hot feeding,rubber filtering,rubber injection ,magnetic strip.

     

    Copyright 2022 © 舟山市定海金锚塑化机械制造厂单位门户网站Zhejiang Huamao Machinery Co., Ltd./Zhoushan Jinmao Machinery Factory All Rights Reserved. 浙ICP备15025201号

    Keywords: Extruder screw barrel   Injection screw barrel    Rubber screw barrel   Conical twin screw barrel   Parallel twin screw barrel   Bimetallic screw barrel   Planetary screw barrel   Segment screw barrel   Extruder and production line  
  • SKYPE

    Linda12149

    MSN

    Linda1214@live.com